Never happened
(midwest.social)
(midwest.social)
I do engineering so the holy Trinity e^jπ = 1 is very important to my religion. Please be more respectful.
Respectful, to an electrical engineer?
Speaking as a chemical engineer that's worked in the water industry for twenty years; '3' is sufficiently accurate as a value of pi for most engineering purposes. If I'm estimating how long it will take me to pump the water out of a tank and need to do the pipe equations in my head, then what I really want to know is if it'll take an hour or a day or a week. If I wanted a new pump to do that permanently, then I'd do the sum, add 10% to allow for degradation of the pump and pipework over the decades, pass that information to our purchasing team who will then strike a deal with the pump manufacturer, and who knows what I'll actually end up with. There's not really much need for a really accurate value of pi.
In fact, '5' is probably sufficiently accurate as a value of pi for engineering purposes, and makes the calculations easier.
Being able to do really accurate calculations does have its place, but having a feel for the kinds of numbers that are sensible is much more important for most day-to-day activities.
I guess it depends on what field you're in as an engineer. I'm also a chemical engineer, and chemical engineering is very much FAFO engineering imo. I've worked with construction engineers, and they tend to be very precise in their calculations. Before they add their huge safety margins I mean.
I have never once needed to multiply anything by 3.14159.
I hate when people use 'times' like that. You have never once needed to MULTIPLY anything by 3.141... And yes you probable have, you just don't recognize it or write it down in numbers.
Ima say that someone who uses "times" instead of "multiply" has, in fact, probably never had any use for 6 digits of Pi. Or probably even 2 digits.
22/7 Gang: represent!
Ah, a bible scholar, I see.
He made the Sea of cast metal, circular in shape, measuring ten cubits from rim to rim and five cubits high. It took a line of thirty cubits to measure around it.
1 Kings 7:23
(31.416 cubits)
FWIW the times thing might just be British versus American English thing
That particular aspect reads perfectly fine in British English
The point is still a bit dumb, but not for that reason
adding on as an American here, 'times' is fine but contextually its a bit weird?
i can say "ten times ten" but "I have never once had to times anything..." is a bit weird? idk if its like a word that needs the number?
It triggers the same vibe in my head as someone who would put adjectives out of order, like "the big red car" vs "the red big car." both are technically fine but for whatever reason the size should come before the color.
I agree with everything but your adjective order - there's nothing in English requiring that order, though I find "red bug car" odd, I don't think it's as incorrect as saying "having to times something".
Curious what a linguist has to say here.
Not a linguist, but yes there's an order to adjectives in English.
• Opinion (e.g., fun, lovely)
• Size (e.g., big, little)
• Age (e.g., new, old)
• Shape (e.g., round, square)
• Color (e.g., red, blue)
• Origin (e.g., American, French)
• Material (e.g., rubber, wood)
• Purpose (e.g., playground, sleeping)
"She kicked the lovely big old round red American rubber playground ball across the yard."
Adjective ordering is not required but moving them around can change meaning and sound absurd.
Times = multiplied by
3 × 6 = ~~17~~ 18
3 multiplied by 6 equals ~~17~~ 18
Saying
3 multiply 6 equal ~~17~~ 18
Does not sound correct
Multiply is a verb
Times is a preposition, nown, or informal verb
"I have 6 nickels worth .05 dollars, I need to (...) .05 by 6 to get the amount"
Times there would be an informal verb and not "correct"
TL;DR: Always use multiply as a verb. If you want to be formal use "multiplied by" instead of times.
"3 multiplied by 6 equals 17" certainly doesn't seem right either!
well that's because its 18 ;)
I'm sticking with my original theory.
if the number is next to the multiplication, then you use times.
for example "three times six is eighteen"
but if the numbers being multiplied aren't right next to it, you should use multiplied/multiply/multiply with.
for example "I have three apples from each apple tree, and I have 8 apple trees. If I multiply I have 24 apples."
Sounds perfectly fine to me
I use "times" a lot
But in like a scenario where I was trying to figure something out.
"30 cents! Oh they must have had 6 nickels and multiplied by its value to get that."
I'd say that. Many would say "times" there. Maybe even "timesed by" which is kind of funny
And 'takeaway' for subtract.
We should bring it up at the next pedants anonymous meeting. :)
Its 'minus' that gets me.
Oh I have the total time so I can just minus the split from that.
Just ew.
Oh I have the total time so I can just plus the split from that.
I have a feeling that you might have had to multiply with pi using several digits
Three times ten is (thirty)
Three times nine is (twenty-seven)
Three times eight is (twenty-four)
Three times seven is (twenty-one)
Three times six is eighteen
Three times five is fifteen
Three times four is twelve
And three times three is nine
And three times two is six
And three times one is three, of course
(Now, dig the pattern once more)
But how will you draft a circle skirt?
As a cheapskate, I've used it to determine which pizza is of the highest value i.e. largest area-per-dollar
Depending on the store, it's not always the largest pizza.
Edit: after thinking about it, pi is a constant, and radius is directly proportional to diameter, so squaring the diameter is enough to provide a ranking of the pizzas' values 😅
If you let radius be Z then you can find the area of a pizza with the formula:
Pi * Z * Z = A
And I think that's beautiful
You have been added to the Best of Lemmy by schipelblorp@sh.itjust.works: https://sh.itjust.works/post/70266187
Give this individual a Nobel prize
I think in mathematics it's the Fields medal.
Give them that too
I'd settle for some pizza tbh
I did this math when I delivered pizza and realized the weight was more important.
You have to factor in the crust thickness and if someone offers pan pizza or thick crust without an upcharge that’s cheaper.
Fortunately, you’ll have to try all the pizza in town to make this determination.
I finally found a use for our AI at work. Behold the perfect 18" pizza
Are we doing pizza math? Here's my entry.
Did you know that two 12 inch pizzas is less pizza than one 18 inch pizza?
We can use pi to determine the area of a 12" pie:
A = πr² = π * 36 = 113.1in²
Multiply that by 2 because we want two of them, so that's 226 square gooey, cheesey inches of delicious pizza.
Now let's look at one 18" pie:
A = πr² = π * 81 = 254.47in²
So if it's cheaper to get one 18" pizza as opposed to two 12" pizzas, you should always get the 18".
I'd want grams/ dollar, but that information is obviously not available on the menu. Most places only have a single type of crust, though, so area is close enough to compare, but if they have different crusts, you might be missing the higher value pizzas.
Or the radius!
I guess I'm a big fucking nerd because I've used it multiple times in various home projects.
Not a machinist then.
Or electrical engineer.
OP probably like "no dude, pie are circle" in the same voice as the manager on Jimmy Neutron arguing about sodium chloride.
Someone has never had to answer some really stupid questions like "How many calories does 1 square inch of pizza have? I need to determine if I can use them as croutons in a salad."
A 14 inch pizza is usually between 2 and 3 pounds. If we assume 2.64 the math is easier.
1.2kg total and a serving of 400g works out to be around 900 calories per serving, or 2700 for the whole pie.
The area of a circle is πr^2
7^2=49
49*π=153.94 square inches.
2700/153.94 = 17.5 calories per square inch.
If you compare this to regular croutons, they're about 4 times the calories, But absolutely worth it.
Thanks NEERRRRD
j/k i just never get to call others that.
::: spoiler same :::
You think geometry is a practical skill, but if you work with carpenters, they have all kinds of work arounds for anything they need to cut and measure.
The only time I've seen a carpenter get nerdy was when one had to build a large, circular roof, but even that may have been the result of not knowing how to fake it because it was such a novel project.
The only time I've seen a carpenter get nerdy
Ask them about wood joints
Real ones work in radians.
I mean, isn't pi already in radians?
👀 excuse me, I meant circumference, more strictly speaking. Aka 2pi vs 3.14
I wonder what kind of life one must live to never have to use anything beyond the most basic arithmetic. It must be sad.
I’ve used some geometry in Minecraft.
I was sailing in the pacific in rough seas and had to when something broke
Also use it all the time as a mechanical engineer
Electrical engineer here, don't give a shit what pi is. shrug
Liar.
XL=2πfLX_L = 2\pi f L XC=12πfCX_C = \frac{1}{2\pi f C}
X(f)=∫−∞∞x(t)e−j2πftdtX(f) = \int_{-\infty}^{\infty} x(t) e^{-j 2\pi f t} dt
ℏ=h/2π\hbar = h / 2\pi
This looks like the physicists blackboard in a B-movie.
In the movie they wouldn't be real or they would be but for something goofy and unrelated. But yeah it does.
Yes, I know you worked hard on it, but I think the formatting makes it hard to read, and I only got two semesters of physics and 3 of calculus, so even best case it would probably look like a movie blackboard to me even in LaTEX.
I don't use those equations at all. I don't even recognize them, though that's probably at least partly due to the horrific formatting of them in your comment.
Software is the primary method of performing calculations in engineering and has been for my entire professional career.
Even I recognize those equations, and I only studied electronics on the tradie level before dropping out.
So you're not qualified in the least for the profession you claim. We're back to the part where you're a liar.
Such a weird stance to take over a random internet comment but you do you
you do you
Too true, you too boo boo.
I've used it to calculate the volume of beer lines to see how much beer is essentially wasted from keg to tap.
πr2l innit.
I like doing geometric art, so math ends up coming in handy pretty often. That being said, I can’t remember the last time I used pi outside that one context.

Matrix chat room: https://matrix.to/#/#midwestsociallemmy:matrix.org
Communities from our friends:
LiberaPay link: https://liberapay.com/seahorse