"They hold 50 pounds each. Four times 50 is 200 pounds, this thing can't weigh more than that. It'll be fine."

Hanging shit on walls, and tying shit to the top of a car are two areas my dad passed on a healthy paranoia about to me. It takes me longer to tie a sheet of plywood to the roof rack than it does to drive home from the store. But, I've never once lost anything off the roof of my car, and I've never had anything come down from a wall like this.

Speaking of tying things to the roof of a car. I was moving my bed from one house to another but didn't have a truck to move it. We strapped the bed to the top of our Nissan Versa and drove across town in the middle of the night at like 15 mph. Bed didnt budge.

My dad passed a certain healthy paranoia on to me. But now he seems to have forgotten it all... Quick tug on a strap, wiggle the object a little, "yup, looks good!"

As long as you say "that's not going anywhere", it'll definitely hold

You have to twang all the ropes while incanting.

Well and people forget even if the toggle bolt can hold the weight, can the drywall be trusted to?

Almost forgot walls are made out of nothing in North America

I'd like to take a moment to say fuck the standard in the box plastic expansion drywall anchors

Every other type of drywall anchor is better and only for a few cents more. These always go in the trash.

I hate fastening anything to drywall. To me all the different flavors of anchors are just a good indicator that there's no damn good way to do this. Whenever I can get away with it, I will misuse drywall hooks to hang rather than fasten things to drywall.

These are easy to install, leave only a pinhole in the wall and some are rated for 50lb loads.

Everything reminds me of her....

I'm partial to snaptoggles myself

Toggle bolts. Not the shitty "spring toggles" -- actual toggle bolts like Hilti's HTB-2, Cobra's "FlipToggle", or Toggler's "SnapToggle". They're strong and don't drop the toggle down the wall if you take the bolt out. Only downside is you have to drill a bigger hole, you need to have enough clearance for them to "flip", and removing them is more of a chore.

These things:

EZ Anchors all the way

I use these because you can take them out and reuse them, and the screw comes out and goes back in.

Toggle bolts are stronger, but you can't take the screw all the way out without losing the back piece, that limits their utility somewhat.

💯 Those are my go to replacements. If it's really heavy use toggle and probably try to find a stud to bare most of the weight.

But for everything else threaded anchors. Sure they leave a bigger hole, but you get a much bigger hole if something falls out. Better to secure it right once.

My wife thinks these sucks. I cant convince her that these are not to be hammered into the drywall...

I love em

Wh… what? You drill them in… why the hell would you hammer them in???

Because you’re his wife silly.

That was my first thought, "who thought drywall would hold up a wall mounted rack?!" There's a reason they put plywood in there

So it's plywood screwed to stud and rack screwed to plywood?

That is what I usually see. But for network equipment. Not servers. Those should always be in floor racks

People always forget that tolerances like that are specific to certain situations, and that just because it has 50lb tolerance under one kind of load doesnt mean its going to have the same tolerance under a totally different set of stress. Or that 4 of them doesnt mean it can hold 200lbs with any certainty, unless the 200lbs is 4 independent 50lb things

I always secure the load in my truck bed even if there is zero chance of it getting free on regular roads. I'd rather it dodn't shift around and definitely don't want the wind to suck it up and possibly out on the highway.

Grew up doing farm work where a rut or other dip in a field could occasionally lauch things around when going too fast, including people chilling in the bed...

Same but it was a golf cart with a lift kit and not the stock speed controller

If one will hold it, then 4 is good insurance.

That's always been my approach to tying/strapping things down, whether on a roof or trailer.

I've lost about 25% of all the tie down straps I've ever owned. They're on the road, somewhere. But never a load.

Flex in materials is a bitch.

Now wall anchors are only for light stuff. You want some weight, then I'm doing lags into studs, even if that means I need to mount some wood across studs first.

Lags into studs is how I mount my safes. Nothing else will do.

Trainee: “Well anyway, I’m gonna clock out. See you on Monday.”

And they should, their free time is theirs.

Similarly, the first computer bug:

At least the firewall is still up.

Why would you just put the rack on the floor? I would put it on wheels for ease of access but come on bro>?>?>>

Usually for ventilation purposes

No sides open top, its perfectly ventilated unless the room doesn't have the tonnage to support the heat load. My guess is they thought it looked slick mounted to the wall. And here we are, gravity is a harsh mistress.

I have a similar rack in my house, but even I was smart enough to mount it on plywood.

Absolutely, I liked using birch laminate plywood to mount these racks. Yes expensive but it wasn't my money and I'm SUPER lazy. I do it right so I only do it once.

I'm cheap, so I couldn't justify better than BC (or maybe even CDX?) for the back of a closet, LOL

I had to go with white oak ply since everything else was severely cupped.

This is a very anxiety inducing picture isn't it

Its really the companies fault for having walls.

Eh? Looks okay. Even without dust.

Those look like networking switches

I wanna know how much actually went offline?

You also looking at the pic trying to tell if anything came unplugged?

Yes toggles are insufficient for this load, but I think the fixtures here are actually my nemesis: screw in plugs.

They're a flawed premise and really only appropriate for hanging a postcard on brand new gyprock.

The thread is supposed to slice through the gyprock and provide the hold. Gyprock / drywall gets brittle with age so screwing one of those bad boys in just makes it all crumble, even if it doesn't actually fall apart. The fixture has no strength at all.

Toggles are fine for a curtain rail. Anything else is a lug in a stud.

Personally I only trust good 1/4”-1/2” plywood backing for drywall or some solid redheads for block.

midwest.social

Rules

  1. No porn.
  2. No bigotry, hate speech.
  3. No ads / spamming.
  4. No conspiracies / QAnon / antivaxx sentiment
  5. No zionists
  6. No fascists

Chat Room

Matrix chat room: https://matrix.to/#/#midwestsociallemmy:matrix.org

Communities

Communities from our friends:

Donations

LiberaPay link: https://liberapay.com/seahorse